After being disconnected from the power supply, the chip automatically saves the current lighting settings
When the light is turned on again, it will automatically restore the previously set brightness and color temperature
2-hour timer for automatic shutdown design, preventing children from excessive eye use and cultivating their good eye-using habits
If used for 5 hours every day, it can last for about 20 years
Let good light accompany children throughout their school days
The lamp arm can be adjusted up and down within the range of 142-152cm
The lamp head can be adjusted back and forth within the range of 19.5-23.5cm
The silicone hose can be twisted left and right
Suitable for children of different heights and positions to find the most appropriate light
Turn on the light: Press the remote control once briefly.
Turn off the light: When the light is in working state, press the remote control twice briefly.
Press the center point of the remote control briefly:
Turn on the light - 3000k - 4000k - 5000k - 6000k - Turn off the light.
After turning on the light, press and hold the center point of the remote control to adjust the brightness of the light slowly and steplessly.
Press three times briefly: The indicator light on the lampshade turns blue, and the function is activated;
Press three times briefly again (or press and hold the remote control for three seconds), the blue indicator light goes off, and this function is deactivated.
After correct installation or battery replacement, if the remote control fails to work properly, re-pairing is required:
Press and hold the remote control while turning on the power of the lampshade;
When the light starts to dim slowly, it indicates that the pairing is successful.
dpdupi
16W
(160*0.2W/LED Module)
12V 1000mA
Ra98
Stepless + gear
Dimming and color adjustment
1100lm
3000k-4000k-5000k-6000k
